Why South Gate Homes Are Different
South Gate’s housing stock is overwhelmingly post-WWII wood-frame bungalows built between the 1940s and 1970s for workers in the surrounding industrial corridor, including the former GM assembly plant. These homes were constructed under essentially no meaningful insulation standards. Most have little or no original attic insulation and uninsulated 2×4 walls. Add in the city’s position between Vernon’s all-industrial zone and the 710 Freeway corridor, and you get one of the LA Basin’s most intense urban heat islands. Summer highs run 10–15°F above coastal communities, and cooling loads stay high well into the evening. Insulation retrofits here are among the highest-ROI upgrades a South Gate homeowner can make.
There’s another pattern we see constantly in South Gate: unpermitted room additions built over converted carports or garages. These spaces routinely lack any thermal boundary whatsoever. Uninsulated slab floors, no wall batts, open eaves. It’s so common near the former GM corridor that it’s practically its own line item on an insulation estimate here. Summit Insulation Long Beach has served South Gate since 2013, and we treat these conversions as a standard part of the job.
Our Main South Gate Services
Two services account for the majority of calls we get from South Gate homeowners, and both trace directly to the city’s housing era and climate.
Attic Insulation in South Gate
Most South Gate attics hold a thin, settled layer of whatever was cheapest in the 1960s, often less than R-11. With attic temperatures pushing 140°F in summer, that means your air conditioner fights a losing battle every afternoon. We pull the old material, air seal the attic floor, and install new insulation matched to the specific roof and framing. The full breakdown of what this job involves and what it costs is on our dedicated page. Attic Insulation in South Gate
Crawl Space Encapsulation & Vapor Barrier in South Gate
Raised foundations are standard across South Gate’s older bungalows, and the crawl space under them is often open to the soil. That means moisture, and moisture means mold, musty air, and insulation that loses its R-value. We seal the floor and foundation walls with a reinforced vapor barrier, insulate the perimeter, and condition the space so it stops fighting your HVAC. Crawl Space Encapsulation & Vapor Barrier in South Gate
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Spray Foam Insulation in South Gate
Spray foam is the most effective retrofit for South Gate’s wood-frame bungalows because it does two jobs at once: it insulates and air seals. In a house built in the 1950s with no house wrap, no sheathing tape, and gaps everywhere, that air sealing matters as much as the R-value. Open-cell foam works well for attic floors and interior walls; closed-cell is what we recommend for attic roof decks, rim joists, and any surface that might see moisture. The owner installs it himself, and we use Demilec and Icynene products matched to each application. You can read more about Spray Foam Insulation on our service hub page. Call (562) 784-9031 to talk through which foam fits your house.
Open-Cell Spray Foam
Signs you need it
Rooms that never hold temperature, attics that feel like an oven by noon, and cooling bills that spike every summer. If you can see daylight around attic penetrations, you’re losing conditioned air through the lid of the house.
What it costs in South Gate
Open-cell spray foam in South Gate attics typically runs $1.50–$3.00 per board foot installed, depending on depth and access.
How we do it
We prep the attic by clearing debris, mask off any areas that shouldn’t be foamed, and apply the open-cell foam in lifts to the target depth. It expands to fill gaps, wiring channels, and framing irregularities that batts can’t reach.
Closed-Cell Spray Foam
Signs you need it
Moisture in the attic, condensation on roof decking, or a rim joist that lets outside air pour into the floor system. Closed-cell foam is also the right call when you want the highest R-value per inch.
What it costs in South Gate
Closed-cell spray foam in South Gate runs $2.50–$5.00 per board foot installed.
How we do it
We apply closed-cell foam directly to the targeted surface in controlled passes. It cures rigid and creates a moisture barrier as well as an air barrier, which matters in South Gate’s older homes where framing is often exposed to outdoor air.
Garage Ceiling Spray Foam
Signs you need it
A converted garage that’s now a bedroom or family room, but still has an uninsulated ceiling and open eaves. These spaces never cool properly because the thermal boundary simply doesn’t exist above them.
What it costs in South Gate
Garage ceiling spray foam in South Gate typically runs $1.50–$3.00 per board foot for open-cell and $2.50–$5.00 for closed-cell.
How we do it
We foam the underside of the roof deck or the ceiling cavity, depending on whether the space is conditioned. In unpermitted conversions that still have the garage door opening, we seal and insulate everything else first.
What Spray Foam Insulation Costs in South Gate
| Item | Typical range in South Gate |
|---|---|
| Open-cell spray foam | $1.50–$3.00 per board foot |
| Closed-cell spray foam | $2.50–$5.00 per board foot |
| Rim joist spray foam | $2.50–$5.00 per board foot |
| Garage ceiling spray foam | $1.50–$5.00 per board foot depending on foam type |
| Spray foam roof deck | $2.50–$5.00 per board foot |
Is spray foam worth it in South Gate?
Yes, for most South Gate homes it is, because the combination of air sealing and insulation cuts cooling load more than batt or blown-in insulation alone can. In a 1950s bungalow with no house wrap, the air sealing alone can be worth the cost. Call (562) 784-9031 for a straight answer on your specific house.
Can you spray foam an open attic roof deck in South Gate?
Yes, and that’s often the single biggest improvement a South Gate home can get. Foaming the roof deck brings the attic inside the conditioned envelope, which means your ducts stop sitting in 140°F air. It changes the house’s thermal behavior immediately.
Blown-In Insulation in South Gate
Blown-in insulation is the most cost-effective retrofit for South Gate’s older attics, especially in the small single-story bungalows that make up so much of the city. Most of these homes have either nothing or a thin layer of settled fiberglass from decades ago. Blowing in fresh material over the entire attic floor takes a day or less and drops right on top of the air sealing we do first. We run GreenFiber cellulose and Johns Manville fiberglass, matched to the attic’s depth, access, and what’s already up there. The details are on our Blown-In Insulation service page. Call (562) 784-9031 for an attic-specific quote.
Blown-In Cellulose
Signs you need it
High cooling bills, an attic that’s visibly under-insulated, or uneven temperatures room to room. If you can see the ceiling joists poking through the existing insulation, you’re way under code.
What it costs in South Gate
Blown-in cellulose in South Gate attics typically runs $1.00–$2.50 per square foot installed.
How we do it
We air seal the attic floor first, then blow cellulose to the target depth with a calibrated machine. Cellulose compacts well around framing and electrical, and it’s made from recycled material, which a lot of South Gate homeowners like.
Blown-In Fiberglass
Signs you need it
Same signals as cellulose, but fiberglass is often the pick when the attic already has fiberglass up there and you’re topping it up rather than starting fresh.
What it costs in South Gate
Blown-in fiberglass in South Gate runs $0.80–$2.00 per square foot installed.
How we do it
We blow the fiberglass in a uniform layer to the agreed R-value, keeping baffles open at the eaves so soffit vents still breathe. In a typical South Gate bungalow this is a one-day job.
Dense-Pack Wall Insulation
Signs you need it
Walls that radiate heat in summer and cold in winter, rooms added over carports or garages that never hold temperature. South Gate’s uninsulated 2×4 walls are the weak point in most of these homes.
What it costs in South Gate
Dense-pack wall insulation in South Gate typically runs $2.00–$4.50 per square foot of wall area.
How we do it
We drill small access holes through siding or drywall and pack cellulose or fiberglass into the wall cavity under pressure. The dense pack prevents settling and fills the entire cavity between studs.
What Blown-In Insulation Costs in South Gate
| Item | Typical range in South Gate |
|---|---|
| Blown-in cellulose | $1.00–$2.50 per sq ft |
| Blown-in fiberglass | $0.80–$2.00 per sq ft |
| Dense-pack wall insulation | $2.00–$4.50 per sq ft of wall |
| Blown-in top-up over existing insulation | $0.80–$2.00 per sq ft |
How much blown-in insulation does a South Gate attic need?
Most South Gate homes should carry R-38 to R-49 in the attic, which translates to roughly 12–16 inches of blown material depending on the product. Most 1950s–60s bungalows we see are sitting at R-8 to R-11, so the gap is big.
Can you top up existing attic insulation without removing it?
Yes, if the existing material is dry, free of rodent contamination, and not badly settled. We inspect first. If there’s any sign of pests, moisture, or old vermiculite, we recommend removal before new insulation goes in.
Radiant Barrier Installation in South Gate
Radiant barrier is the service most general insulation contractors skip, and it’s exactly what South Gate’s heat island demands. Batt and blown-in insulation slow conductive heat, but they don’t stop radiant heat from the sun baking your roof deck and radiating into the attic. A radiant barrier installed on the underside of the rafters reflects that heat back out, and in a city where attic temperatures hit 140°F, that’s not a nice-to-have. We install it as a standalone upgrade or add it to a full attic insulation job. Radiant Barrier Installation is a service we’ve run on dozens of South Gate attics. Call (562) 784-9031 if you want to know what your attic would gain.
Attic Radiant Barrier
Signs you need it
An attic that’s unbearable to walk through in summer, air conditioning that runs nonstop between noon and 7 p.m., and upstairs rooms that never get cool. If your roof deck is directly exposed to the sun with no barrier, you’re paying to re-cool hot air.
What it costs in South Gate
Attic radiant barrier in South Gate typically runs $1.50–$3.00 per square foot of attic floor area installed.
How we do it
We staple a perforated foil barrier to the underside of the roof rafters, leaving the proper air gap so it can actually reflect heat. The perforations let moisture pass so you don’t trap condensation against the roof deck.
Radiant Barrier & Ventilation
Signs you need it
An attic that’s both hot and poorly vented. If you only have gable vents or no soffit vents at all, the heat has nowhere to go, and adding a barrier alone won’t fix the stack effect.
What it costs in South Gate
Radiant barrier plus ventilation improvements in South Gate runs $1.50–$4.00 per square foot depending on what venting changes are needed.
How we do it
We assess the existing vent ratio first. South Gate’s older homes often have minimal soffit venting, so we add or enlarge vents before or alongside the barrier install so the reflected heat has an exit path.
What Radiant Barrier Installation Costs in South Gate
| Item | Typical range in South Gate |
|---|---|
| Attic radiant barrier | $1.50–$3.00 per sq ft of attic floor |
| Radiant barrier foil material | $0.30–$0.80 per sq ft |
| Radiant barrier roof deck | $1.50–$3.00 per sq ft |
| Radiant barrier & ventilation combo | $1.50–$4.00 per sq ft |
Does radiant barrier work without insulation in a South Gate attic?
It helps, but it works best paired with insulation. Radiant barrier cuts the heat that radiates down from the roof deck; insulation cuts the heat that conducts through the attic floor. You want both, especially with South Gate’s sustained summer heat.
Is radiant barrier worth it in South Gate specifically?
Yes, more than in coastal LA cities. South Gate sits in a concentrated urban heat island, so the roof deck takes hours more direct sun load. A radiant barrier can cut attic temperatures 20–30°F, which translates to real cooling savings.
Insulation Removal & Replacement in South Gate
Removal is the step most homeowners don’t know they need until we look in the attic. In South Gate, decades of heat, dust, and rodent activity leave old insulation compacted, contaminated, and useless. You don’t put new insulation over that, you pull it out and start clean. We remove fiberglass, cellulose, and when it appears, old vermiculite, then air seal and install fresh material. The full service breakdown is on our Insulation Removal & Replacement page. All of it is done by the owner and our crew, not a subcontractor. Call (562) 784-9031 for an attic assessment.
Attic Insulation Removal
Signs you need it
Insulation that’s been there 40+ years, has visible dust or pest activity, or is so settled it’s doing almost nothing. If the material is damp or smells musty, that’s another clear signal.
What it costs in South Gate
Attic insulation removal in South Gate typically runs $1.50–$3.00 per square foot of attic floor.
How we do it
We use a commercial vacuum system to pull the old material out down to the drywall or plaster, then inspect the framing and wiring. The attic gets a clean start for air sealing and new insulation.
Vermiculite & Old Insulation Removal
Signs you need it
Grayish pebbly material in the attic is usually vermiculite, and some vermiculite contains asbestos. If you see it, don’t disturb it, just get it tested and removed by someone who handles it properly.
What it costs in South Gate
Vermiculite removal in South Gate is priced by testing and containment needs, typically $3.00–$6.00 per square foot depending on lab results.
How we do it
We contain the area, remove the material under negative pressure, and have it disposed of at a licensed facility. We don’t cut corners on this because the risk isn’t worth it. This is one job where a trained professional is non-negotiable.
What Insulation Removal & Replacement Costs in South Gate
| Item | Typical range in South Gate |
|---|---|
| Attic insulation removal | $1.50–$3.00 per sq ft |
| Contaminated insulation removal | $2.00–$4.50 per sq ft |
| Vermiculite & old insulation removal | $3.00–$6.00 per sq ft |
| Insulation replacement | $1.00–$2.50 per sq ft for blown-in, material dependent |
Can new insulation go over old insulation in South Gate?
Sometimes yes, if the old material is dry, clean, and in decent shape. But in most South Gate attics we see, the existing insulation has been there since the 1980s or earlier and is contaminated with dust, pests, or moisture. We inspect before recommending anything.
How long does full removal and replacement take in South Gate?
Most single-story South Gate homes are done in one day, sometimes two if the attic is large or heavily contaminated. We aim to get the attic cleaned, sealed, and re-insulated within the same week.
Attic Air Sealing in South Gate
Air sealing is the quiet half of every good insulation job, and in South Gate it’s often the more important half. Your house moves air through the attic constantly: warm air rises through electrical penetrations, plumbing stacks, and the gap around the attic hatch, and pulls hot outside air in through the walls. In a 1950s bungalow with no modern air barrier, that leakage can rival an open window. We seal the attic floor before any new insulation goes in, because insulation over leaks just filters the air instead of stopping it. Our Attic Air Sealing page covers the process in detail. Call (562) 784-9031 to schedule an inspection.
Attic Floor Air Sealing
Signs you need it
Dust streaks on the insulation, rooms that won’t hold temperature, and a house that feels drafty in winter. If you can see the tops of interior walls from the attic, those are leakage paths.
What it costs in South Gate
Attic floor air sealing in South Gate typically runs $1.00–$2.50 per square foot of attic floor.
How we do it
We pull back any existing insulation, seal every penetration with foam and caulk, and verify the work before reinstalling or topping up the insulation. Top plates, wire runs, and plumbing stacks all get sealed.
Can Light & Duct Boot Sealing
Signs you need it
Recessed can lights that feel warm to the touch, rooms directly under lights that get hotter than others, and ducts that run through a hot attic and leak air at the boots.
What it costs in South Gate
Can light and duct boot sealing in South Gate runs $75–$200 per fixture or boot when done as part of a broader air sealing job.
How we do it
We seal around each can light with a fire-rated enclosure where possible, and tighten every duct boot at the ceiling plane. This also keeps attic air from being pulled into the return side of your HVAC.
What Attic Air Sealing Costs in South Gate
| Item | Typical range in South Gate |
|---|---|
| Attic floor air sealing | $1.00–$2.50 per sq ft |
| Top plate & penetration sealing | $1.00–$2.50 per sq ft |
| Can light & duct boot sealing | $75–$200 per fixture/boot |
| Attic hatch sealing | $100–$300 per hatch |
Does air sealing make that big a difference in South Gate?
Yes, and it’s often the cheapest improvement per dollar of savings. South Gate’s heat island means your home is constantly fighting outside air. Sealing the leaks first means whatever insulation you add actually gets to do its job.
Should air sealing be done before or after adding insulation?
Always before. You can’t seal what’s buried under 14 inches of new blown-in insulation. We air seal the attic floor first, then install insulation on top. That’s the only order that makes sense.
Wall Insulation in South Gate
South Gate’s homes were built before wall insulation was standard, so most 2×4 walls in this city are empty cavities. That means the sun’s heat comes straight through the stucco and siding into your living room. We retrofit walls with injection foam or dense-pack material, working from the exterior or interior depending on the siding and access. It’s a targeted fix that transforms how a room feels. The full method and material options are on our Wall Insulation page. Call (562) 784-9031 to talk about your specific walls.
Injection Foam Wall Insulation
Signs you need it
Walls that feel warm to the touch in summer, rooms on the west side of the house that never cool, and outside noise that comes through clearly. Empty 2×4 cavities are the giveaway.
What it costs in South Gate
Injection foam wall insulation in South Gate typically runs $2.50–$5.00 per square foot of wall area.
How we do it
We drill small access holes through the exterior or interior surface and inject foam into each stud cavity. The foam expands slowly to fill the cavity without bowing the drywall.
Drill & Fill Wall Insulation
Signs you need it
Same empty-wall symptoms, but when the wall cavities are irregular or you’re doing a one-room retrofit rather than the whole house. It’s also the right approach for converted garage additions.
What it costs in South Gate
Drill and fill wall insulation in South Gate runs $2.00–$4.00 per square foot of wall area.
How we do it
We drill injection ports, blow dense-pack cellulose or fiberglass into each cavity, then patch the holes. The work is done from one side, which keeps the disruption minimal.
What Wall Insulation Costs in South Gate
| Item | Typical range in South Gate |
|---|---|
| Injection foam wall insulation | $2.50–$5.00 per sq ft |
| Drill & fill wall insulation | $2.00–$4.00 per sq ft |
| Exterior wall insulation | $2.50–$5.00 per sq ft |
| Interior wall soundproofing | $2.00–$4.50 per sq ft |
Can you insulate walls without tearing out drywall in South Gate?
Yes, in most cases. We drill small access holes and inject material through them, then patch the holes. The only time we need to open walls is if there’s existing moisture damage or the cavity is blocked.
Which walls matter most in a South Gate home?
The west and south facing walls take the worst of the afternoon sun, especially in South Gate’s inland climate. We often recommend starting there, plus any walls of converted garage or carport additions, which usually have no insulation at all.
Attic Cleaning & Rodent Proofing in South Gate
Rodents are a fact of life in South Gate, with the industrial corridor nearby and older wood-frame homes that rats and mice can chew through with ease. When rodents get into an attic they nest in the insulation, leave droppings, and chew wiring. Before new insulation goes in, the contaminated material has to come out and every entry point must be sealed. We do the full job: cleanout, sanitizing, exclusion, and restoration. The details are on our Attic Cleaning & Rodent Proofing page. Call (562) 784-9031 if you’ve heard scratching at night.
Attic Cleanout
Signs you need it
Visible droppings, nesting material, chewed wires, or a smell you can’t place coming from the attic. If insulation is matted and discolored, rodents have made themselves at home.
What it costs in South Gate
Attic cleanout in South Gate typically runs $2.00–$4.50 per square foot of attic floor.
How we do it
We vacuum out all contaminated insulation, bag it, and dispose of it properly. The bare attic is then ready for sanitizing and air sealing.
Rodent Proofing & Exclusion
Signs you need it
Recurring rodent problems even after trapping. If you don’t close the entries, new rodents move in. South Gate’s older homes have dozens of potential openings: roof vents without screens, gaps at eaves, unsealed pipe penetrations.
What it costs in South Gate
Rodent proofing and exclusion in South Gate runs $800–$2,500 per home depending on how many openings need sealing.
How we do it
We seal every opening with metal mesh, rodent-proof foam, and hardware cloth where needed. Entry points at the roofline, vents, and utility penetrations are the usual suspects. This is the step that makes the fix permanent.
What Attic Cleaning & Rodent Proofing Costs in South Gate
| Item | Typical range in South Gate |
|---|---|
| Attic cleanout | $2.00–$4.50 per sq ft |
| Attic sanitizing & decontamination | $1.00–$2.50 per sq ft |
| Rodent proofing & exclusion | $800–$2,500 per home |
| Attic restoration | $2.00–$4.50 per sq ft |
Do I need to clean my attic before adding insulation in South Gate?
If there’s any sign of rodents, moisture, or old contamination, yes. New insulation over rodent droppings or urine is wasted money and a health problem. We never install new material over a dirty attic.
How do rodents get into South Gate attics?
Mostly through the roof line: unscreened gable vents, gaps under eaves, and utility penetrations. In South Gate’s older bungalows, the roof and wall intersection often has gaps big enough for a rat. We seal them all.
Home Energy Audit in South Gate
A home energy audit is where we start when a South Gate homeowner wants the full picture rather than a guess. We test the house with a blower door, scan with thermal imaging, inspect every inch of the attic and walls, and measure duct leakage. The result is a prioritized list of fixes, not a sales pitch. The audit is the data-driven way to find out whether you need more insulation, better air sealing, or both. Our Home Energy Audit page explains the whole process. Call (562) 784-9031 to schedule one.
Blower Door Test
Signs you need it
High energy bills with no obvious cause, drafty rooms, and a suspicion that the house leaks like a sieve. This test measures the actual leakage rate, which is the starting point for every retrofit.
What it costs in South Gate
A blower door test as part of a home energy audit in South Gate typically runs $200–$500.
How we do it
We mount a calibrated fan in an exterior door frame, depressurize the house, and measure how much air leaks in. It gives us a number, and that number tells us how aggressive the air sealing needs to be.
Thermal Imaging Inspection
Signs you need it
Rooms that are hot in summer or cold in winter with no explanation, walls that feel different from one side of the house to the other. A thermal camera shows exactly where the heat is moving through.
What it costs in South Gate
Thermal imaging as part of a South Gate energy audit runs $150–$400.
How we do it
We scan walls, ceilings, and floors with an infrared camera to find missing insulation, thermal bridges, and air leaks. The images become part of the audit report so you see what we see.
What Home Energy Audit Costs in South Gate
| Item | Typical range in South Gate |
|---|---|
| Blower door test | $200–$500 |
| Thermal imaging inspection | $150–$400 |
| Insulation inspection | $150–$350 |
| Duct leakage test | $150–$300 |
Is a home energy audit worth it before insulating in South Gate?
Yes, because it tells us what order to do things in. In South Gate’s older homes, we often find the attic needs air sealing more than insulation, or a duct leak is costing more than the walls. The audit keeps you from paying for the wrong fix.
What does a South Gate energy audit actually give me?
A written report with leakage numbers, thermal images, and a ranked list of fixes. You get the data and the order of operations. The audit is the recipe; the retrofit is just following it.
Brands We Service in South Gate
We work with Owens Corning, Johns Manville, GreenFiber, and Demilec, among others, and carry the parts and materials these systems need for South Gate attics and walls. Turnaround on brand-specific material is a few days. See our brands for the full list.
Pricing for Insulation in South Gate, CA
| Service | Typical range in South Gate |
|---|---|
| Spray foam insulation | $1.50–$5.00 per board foot |
| Blown-in insulation | $0.80–$2.50 per sq ft |
| Radiant barrier installation | $1.50–$3.00 per sq ft |
| Insulation removal & replacement | $1.50–$6.00 per sq ft |
| Attic air sealing | $1.00–$2.50 per sq ft |
| Wall insulation | $2.00–$5.00 per sq ft |
| Attic cleaning & rodent proofing | $1.00–$4.50 per sq ft, plus $800–$2,500 for exclusion |
| Home energy audit | $150–$500 per test |
Prices in South Gate get pushed up by two things: access problems in older attics and the remediation work that’s common after decades of heat and pests. We quote upfront, and the price you get is the price you pay.
Neighborhoods We Serve in South Gate
We work across all of South Gate and the surrounding unincorporated pockets. Response time for most jobs in the city is same-week, and emergency insulation issues get prioritized.
- Hollydale
- South Gate Park area
- Tweedy Boulevard corridor
- State Street area
- Firestone Boulevard corridor
Service Area — Cities Near South Gate
We also serve homeowners in the cities bordering South Gate. If you’re in Lynwood, CA, Downey, CA, Paramount, CA, or Compton, CA, we cover those homes with the same insulation, air sealing, and rodent proofing services. Call us for your free estimate.
Serving South Gate, CA — Our Local Coverage Area
We’re based in the South Gate area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Insulation in South Gate
Most South Gate jobs are scheduled within the same week, and we can often get an attic inspection done within a day or two of your call. Emergency insulation removal after a rodent problem or water intrusion gets priority. Call (562) 784-9031 for the soonest opening.
Basic insulation installation and air sealing typically don’t require a permit in South Gate, but structural changes around crawl spaces or major remodel additions might. We’ll tell you what applies to your specific house before we start.
Usually yes, especially on homes built before 1980. The combination of attic insulation, air sealing, and a radiant barrier attacks the biggest energy loss in this climate: heat moving through the roof and walls during long inland summers.
What happens when you call
- 1A real person answersNo phone trees — talk to a local insulation pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically same-day.
- 4You approve before work beginsNothing starts until you say go.
What South Gate Customers Say
"Spray foam in the rim joists in the basement. The cold floors above them are gone."
— Tara Ziegler"Plastic laid from the front door to the attic hatch and they vacuumed the hallway afterward."
— Carmen Vargas"Found and sealed a gap around the chimney chase that was basically an open chimney to the attic."
— Marisol Delgado